Health & Environmental Research Online (HERO)


Print Feedback Export to File
1324816 
Journal Article 
Effects of V2O5 addition on NiZn ferrite synthesized using two-step sintering process 
Hu, Jun; Shi, G; Ni, Z; Zheng, Li; Chen, A 
2012 
Physica B: Condensed Matter
ISSN: 0921-4526 
407 
12 
2205-2210 
The combined influence of a two-step sintering (TSS)
process and addition of V2O5 on the microstructure and magnetic properties of NiZn ferrite was
investigated. As comparison, samples prepared by the conventional single-step sintering (SSS)
procedure were also studied. It was found that with 0.3 wt% V2O5 additive, the sample sintered by
the two-step sintering process at a high temperature of 1250 degrees C for 30 min and a lower
temperature of 1180 degrees C for 3 h exhibited more homogeneous microstructure and higher
permeability with a high Q-factor. The results showed that the TSS method with suitable additive
brought positive improvement of the microstructure and magnetic properties of NiZn ferrite. (C)
2012 Elsevier B.V. All rights reserved. 
NiZn ferrite; V2O5; Two-step sintering; Microstructure; Permeability; Q-factor