US EPA

1645629 

Journal Article 

Bi2O3 as a selective sensing material for NO detection 

Cabot, A; Marsal, A; Arbiol, J; Morante, JR 

2004 

1 

Sensors and Actuators B: Chemical
ISSN: 0925-4005
EISSN: 1873-3077 

99 

1 

74-89 

10.1016/j.snb.2003.10.032 

WOS:000221398700012 

In recent years, a growing interest in the development of solid-state gas sensors for combustion exhausts control has arisen. CO2, CO, partially oxidized reactants, NO and NO2 are the main gas exhausts components that result from the combustion of organic compounds. The achievement of a cheap, sensitive and selective enough sensing material to monitor these gases is essential. Although large sensitivities are easily obtained with the commonly used semiconductor oxides, e.g. SnO2, their main problem remains on their lack of selectivity. In this scheme, Bi2O3 has been reported to be a good alternative oxide to selectively detect NO. In the present work, the gas sensing properties of different bismuth oxide structures are studied. Sensors obtained from the printing of the Bi2O3 nanopowders are observed not to have a perceptible response to CO, CO2 and hydrocarbons. In the same way, inappreciable resistance variations with the introduction of up to 10 ppm NO2 are obtained. On the other hand, large enough sensitivities are achieved for NO. Sensing mechanisms of bismuth oxides are further studied at different oxygen partial pressures. (C) 2003 Elsevier B.V. All rights reserved. 

Bi2O3; gas sensor; NO