Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
1736863
Reference Type
Journal Article
Title
Chemical-looping with oxygen uncoupling for combustion of solid fuels
Author(s)
Mattisson, T; Lyngfelt, A; Leion, H
Year
2009
Is Peer Reviewed?
Yes
Journal
International Journal of Greenhouse Gas Control
ISSN:
1750-5836
Publisher
Elsevier
Volume
3
Issue
1
Page Numbers
11-19
DOI
10.1016/j.ijggc.2008.06.002
Web of Science Id
WOS:000262914800003
URL
https://linkinghub.elsevier.com/retrieve/pii/S1750583608000510
Exit
Abstract
Chemical-looping with oxygen uncoupling (CLOU) is a novel method to burn solid fuels in gas-phase oxygen without the need for an energy intensive air separation unit. The carbon dioxide from the combustion is inherently separated from the rest of the flue gases. CLOU is based on chemical-looping combustion (CLC) and involves three steps in two reactors, one air reactor where a metal oxide captures oxygen from the combustion air (step 1), and a fuel reactor where the metal oxide releases oxygen in the gas-phase (step 2) and where this gas-phase oxygen reacts with a fuel (step 3). in other proposed schemes for using chemical-looping combustion of solid fuels there is a need for an intermediate gasification step of the char with steam or carbon dioxide to form reactive gaseous compounds which then react with the oxygen carrier particles. The gasification of char with H(2)O and CO(2) is inherently slow, resulting in slow overall rates of reaction. This slow gasification is avoided in the proposed process, since there is no intermediate gasification step needed and the char reacts directly with gas-phase oxygen. The process demands an oxygen carrier which has the ability to react with the oxygen in the combustion air in the air reactor but which decomposes to a reduced metal oxide and gas-phase oxygen in the fuel reactor. Three metal oxide systems with suitable thermodynamic properties have been identified, and a thermal analysis has shown that Mn(2)O(3)/Mn(3)O(4) and CuO/Cu(2)O have suitable thermodynamic properties, although Co(3)O(4)/CoO may also be a possibility. However, the latter system has the disadvantage of an overall endothermic reaction in the fuel reactor. Results from batch laboratory fluidized bed tests with CuO and a gaseous and solid fuel are presented. The reaction rate of petroleum coke is approximately a factor 50 higher using CLOU in comparison to the reaction rate of the same fuel with an iron-based oxygen carrier in normal CLC. (C) 2008 Elsevier Ltd. All rights reserved.
Keywords
CO(2) capture; CLOU; CuO; Petroleum coke; Methane
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity