Elbeih, A; Zeman, S; Jungova, M; Akstein, Z
Different polymeric matrices, based on butadiene-styrene rubber, polymethyl-methacrylate and silicone binders, were investigated for their ability to decrease the sensitivity of explosives to different mechanical stimuli. A series of plastic explosives based on four different nitramines, namely RDX (1,3,5-trinitro-,3,5-triazacyclohexane), beta-HMX (beta-1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane), BCHMX (bicycloHMX, cis-1,3,4,6-tetranitro-octahydroimidazo-[4,5-d]imidazole) and epsilon-HNIW (epsilon-2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane, epsilon-CL-20), bonded by the selected polymeric matrices were prepared. Sensitivity to impact of all of the plastic explosives prepared as well as of the pure explosives, was measured using the fall hammer test. Sensitivity to friction was determined using the BAM friction test. The performance was studied using the ballistic mortar test and the results were recorded relative to TNT (trinitrotoluene) as reference. By comparing the results of impact and friction sensitivities, it is obvious that the mechanism of transfer of the friction force to the reaction center of the nitramine molecule should be different from that of impact energy transfer. The silicone binder appeared to be the best polymer for decreasing the sensitivity of explosives. The results of the ballistic mortar proved that the performance of the plastic explosives prepared is affected by the type and weight percentage of the binder in each sample.