Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
1935122
Reference Type
Journal Article
Title
Investigation of methods for removal and recovery of manganese in hydrometallurgical processes
Author(s)
Zhang, W; Cheng, ChuY; Pranolo, Y
Year
2010
Is Peer Reviewed?
Yes
Journal
Hydrometallurgy
ISSN:
0304-386X
Volume
101
Issue
1-2
Page Numbers
58-63
DOI
10.1016/j.hydromet.2009.11.018
Web of Science Id
WOS:000274882200009
Abstract
Manganese is a major impurity which needs to be removed in many hydrometallurgical processes while some waste solutions are also important secondary manganese sources. Precipitation methods were investigated for the removal and recovery of manganese from a typical nickel laterite waste solution. Hydroxide precipitation alone was not an attractive option for the recovery and removal of manganese to very low levels due to its poor selectivity. Carbonate precipitation could be used for partial recovery of manganese from the waste solutions, but not desirable for removal of manganese to very low levels due to substantial co-precipitation of calcium and magnesium. Aeration at appropriate pH or using pure oxygen did enhance manganese removal, but this approach remains either kinetically slow or expensive due to the cost of oxygen. The oxidative precipitation with SO(2)/air is very promising for both removal and recovery of manganese from laterite waste solutions and was investigated in detail to identify optimum conditions. It was found that solution pH was the most critical factor for maximising the rate of the oxidative precipitation with little co-precipitation of magnesium and calcium impurities. The SO(2)/air (O(2)) system worked efficiently in a nearly neutral pH range of 6-7, indicating that the system was favourable for treatment of metallurgical waste solutions. SO(2)/air (O(2)) ratio is another important factor for maximising the oxidising capacity of the SO(2)/air (O(2)) system and the utilisation of SO(2) and O(2) reagents with minimum consumption of base reagents for neutralisation. In this paper, potential commercial applications of these methods and their constraints are discussed. (C) 2009 Elsevier B.V. All rights reserved.
Keywords
Manganese removal and recovery; Oxidative precipitation; Sulphur dioxide
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity