US EPA

1964599 

Journal Article 

Determination of steroids by liquid chromatography mass spectrometry 

Ma, YC; Kim, HY 

1997 

1 

Journal of the American Society for Mass Spectrometry
ISSN: 1044-0305
EISSN: 1879-1123 

8 

9 

1010-1020 

WOS:A1997XT64300008 

On-line atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) liquid chromatography/mass spectrometry (LC/MS) were evaluated for the analysis of a variety of steroids. Steroids were classified into three major groups based on the spectra and the sensitivities observed: (I) those containing a 3-one, 4-ene functional group, (LI) those containing at least one ketone group without conjugation, and (III) those containing hydroxy group(s) only. In the APCI mode, the best sensitivity and the lowest detection limit for all three groups were obtained by using a mobile phase consisting of methanal and 1%-2% acetic acid in water. The APCI spectra were characterized by MH+, MH+-H2O, MH+-2H(2)O, etc., with the degree of H2O loss being compound dependent: group I steroids produced stable MH+ and group III steroids showed extensive water loss. In the electrospray mode the best sensitivity and the lowest detection limit for the first two groups were obtained when pure methanal and water were used as the mobile phase. This condition produced abundant stable MNa+ due to ubiquitous sodium. Detection limits in the 5-15 pg range can be easily achieved using ESI LC/MS. Addition of ammonium acetate or use of acetonitrile in the mobile phase, common in the LC/MS analysis of steroids, decreased the sensitivity for the group I and II steroids and thus should be avoided. For group III steroids, the detection limit can be improved by the addition of acetic acid to the mobile phase. (C) 1997 American Society for Mass Spectrometry.