Health & Environmental Research Online (HERO)


Print Feedback Export to File
2022919 
Journal Article 
Microemulsion copolymerization of vinyl acetate and butyl acrylate using a mixture of anionic and non-ionic surfactants 
Ovando-Medina, VM; Peralta, RD; Mendizabal, E; Martinez-Gutierrez, H; Corona-Rivera, MA 
2011 
1 
Polymer Bulletin
ISSN: 0170-0839
EISSN: 1436-2449 
SPRINGER 
NEW YORK 
66 
1 
133-146 
WOS:000286297800009 
Monomer mixtures of vinyl acetate (VAc)/butyl acrylate (BuA) were polymerized in batch reactions at 60 degrees C with potassium persulfate as the initiator in microemulsions consisting of VAc:BuA (85:15 wt/wt)/water/sodium dodecyl sulfate (SDS)/polyoxyethylene (23) dodecyl ether (3:1 wt/wt). The effect of the concentration of the monomer mixture on the kinetics was studied. It was found that, as the total monomers concentration ([M](0)) increases, the polymerization rate increases also, and that the maximum polymerization rate is proportional to [M](0)(1.26). Particle size increases with total monomers concentration. In all cases, final average particle diameter was less than 50 nm. Particle number density is independent of total monomers concentration. A mathematical model that takes into account the partition of monomers between the different phases during polymerization using a minimum of adjustable parameters was applied to simulate the experimental data. A correlation for the radical desorption coefficient, which is a function of the rate of monomer chain transfer and of the probability of desorption, was used in the model. Radical capture by micelles and particles was assumed to occur by diffusion. The model takes into account both micellar and homogeneous nucleation. Good agreement between the model and the experimental results was observed.