Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
2272547
Reference Type
Journal Article
Title
Hydrothermal liquefaction of barks into bio-crude - Effects of species and ash content/composition
Author(s)
Feng, S; Yuan, Z; Leitch, M; Xu, CC
Year
2014
Is Peer Reviewed?
1
Journal
Fuel
ISSN:
0016-2361
EISSN:
1873-7153
Volume
116
Page Numbers
214-220
DOI
10.1016/j.fuel.2013.07.096
Web of Science Id
WOS:000326943400029
Abstract
Liquefaction of barks of white pine, white spruce and white birch was performed in ethanol-water (50: 50, v/v) co-solvents under the initial N2 pressure of 2.0 MPa at 300 degrees C for 15 min. It was found that the liquefaction efficiency, in terms of bark conversion and bio-crude yield, varied significantly with bark species and ash content/composition. As far as the bark conversion was concerned, the order follows: white spruce bark (92%) > white birch bark (89%) > white pine bark (68%), which is also in good agreement with the ash content of the barks: white spruce bark (3.07%) > white birch bark (2.68%) > white pine bark (1.07%). Bio-crude yield reduced in the following order: white birch bark (67%) > white spruce bark (58%) >> white pine bark (36%). Effects of ash content on bark liquefaction were investigated by comparing the liquefaction efficiencies between crude bark and de-ashed bark. Deashing pre-treatment of barks in 0.5 M nitric acid efficiently decreased ash content in barks of white pine, white spruce and white birch form 1.07%, 3.07%, 2.68% to 0.67%, 0.33% and 0.32%, respectively. The de-ashing of bark decreased both bark conversion rate and bio-crude yield for all barks, suggesting that the ash of the bark play catalytic roles in the bark liquefaction, which was confirmed by the addition of K2CO3 and Ca(OH)(2) into de-ashed barks. The bark-derived bio-crude oils are aromatic/phenolic in nature with HHVs of 25-39 MJ/kg. The obtained bio-crude oils also have relatively lower molecular weights (Mn = 320-600 g/mol, Mw = 800-1700 g/mol, PDI = 2.2-2.9), which makes the bio-crude oils promising in the applications for either bio-fuel or as a phenol substitute in bio-phenolic resins. (C) 2013 Published by Elsevier Ltd.
Keywords
Bark; Liquefaction; Bio-crude; Ash; Catalysis
Tags
•
LitSearch-NOx (2024)
Keyword Search
Atmospheric
WoS
TIAB Screening
Atmospheric
Round 1
Exclude
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity