Health & Environmental Research Online (HERO)


Print Feedback Export to File
2289484 
Journal Article 
Mechanistic studies of chemical looping desulfurization of Mn-based oxides using in situ X-ray absorption spectroscopy 
Koenig, CFJ; Nachtegaal, M; Seemann, M; Clemens, F; van Garderen, N; Biollaz, SMA; Schildhauer, TJ 
2014 
Yes 
Applied Energy
ISSN: 0306-2619
EISSN: 1872-9118 
113 
1895-1901 
WOS:000329952500183 
Cleaning of producer gas from biomass gasification is required for further processing, e.g. to avoid catalyst poisoning in subsequent conversion steps. High-temperature gas cleaning, of which sulfur removal is an important part, is a promising way to improve the overall efficiency of biomass conversion. In a high temperature "chemical looping desulfurization" process, a sorbent material, here manganese oxide, is cycled between producer gas from the gasifier to remove sulfur species, and an oxidizing atmosphere, in which the sulfur species are released as SO2. Alternatively, the use of such material as reactive bed material could be integrated into an allothermal dual fluidized bed gasifier. In a laboratory reactor, we subjected manganese-based materials to a periodically changing gas atmosphere, simulating a "chemical looping desulfurization" reactor. The "fuel reactor" gas contained H-2, CO, CH4 and H2S, similar as in the producer gas, and the "oxidizing reactor" contained diluted O-2. Mass spectrometry showed that most of the H2S is taken up by the sample in the "fuel reactor" part, while also some unwanted SO2 is generated in the "fuel reactor" part. Most of the sulfur is released in the oxidizing reactor. Simultaneous in situ X-ray absorption spectroscopy (XAS) of the Mn materials during different stages of the chemical looping desulfurization process showed that the initial Mn3O4 is transformed in the presence of H2S to MnS via a MnO intermediate in the fuel reactor. Oxygen from the reduction of Mn3O4 oxidizes some H2S to the undesired SO2 in the fuel reactor. Upon exposure to O-2, MnS is again oxidized to Mn3O4 via MnO, releasing SO2. The presence of CO and/or CH4 in the fuel reactor has no effect on this mechanism. Measuring the structure-performance relationship of gas cleaning materials with in situ methods will enable knowledge-based materials development for improved performance. (C) 2013 Elsevier Ltd. All rights reserved. 
Biomass; Manganese; Chemical looping; XAS; Gas cleaning