US EPA

2588115 

Journal Article 

Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: II. Powder properties 

Goula, AM; Adamopoulos, KG 

2008 

Yes 

Drying Technology
ISSN: 0737-3937 

26 

6 

726-737 

10.1080/07373930802046377 

WOS:000256619900013 

This work investigates the effect of maltodextrin addition on the main powder properties during spray drying of tomato pulp in dehumidified air. A pilot-scale spray dryer was employed for the spray-drying process. The modification made to the original design consisted in connecting the spray dryer inlet air intake to an absorption air dryer. 21 DE, 12 DE, and 6 DE maltodextrins were used as drying agents. Tomato pulp was spray dried at inlet air temperatures of 130, 140, and 150 degrees C and (tomato pulp solids)/( maltodextrin solids) ratios of 4.00, 1.00, and 0.25. The tomato powders were analyzed for rheological properties, moisture content, bulk density, solubility, hygroscopicity, and degree of caking. It was found that maltodextrin addition improved powder hygroscopicity, caking, and solubility, whereas it deteriorated slightly its moisture content and density. In addition, analysis of experimental data yielded correlations between powder properties and the above-mentioned variable operating conditions. Regression analysis was used to fit a full second-order polynomial, reduced second-order polynomials, and linear models to the data of each of the properties evaluated. F values for all reduced and linear models with an R-2 >= 0.70 were calculated to determine if the models could be used in place of full second-order polynomials. 

bulk density; hygroscopicity; moisture content; solubility; spray dryer; tomato powder