Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
3033395
Reference Type
Journal Article
Title
Numerical simulation of dilute and dense layered coal-dust explosions
Author(s)
Houim, RW; Oran, ES
Year
2015
Is Peer Reviewed?
1
Journal
Proceedings of the Combustion Institute
ISSN:
1540-7489
EISSN:
1873-2704
Volume
35
Page Numbers
2083-2090
DOI
10.1016/j.proci.2014.06.032
Web of Science Id
WOS:000348048800109
Abstract
Multidimensional time-dependent simulations were performed to study the interaction of a shock wave and resulting shear layer with layers of coal dust. The simulations used a high-order compressible numerical method for fluid dynamics and included a Eulerian kinetic-theory-based granular multiphase model applicable over a range from dense to dilute particle volume fractions. Two cases were considered: a loose dust layer with an initial volume fraction of 1%, and a dense dust layer with an initial volume fraction of 47%. For both cases, the final result is a coupled complex consisting of a shock leading a coal-dust flame. In the simulations presented here, a shock is initially produced from remnants of a natural gas detonation, which has decayed into a shock once it passes into a region containing no gaseous fuel. This shock weakens further due to mechanical and thermal losses from lifting and entraining the coal dust. The lifted dust subsequently ignites in the shock-heated air and produces a structure similar to a mixing-limited, nonpremixed flame. The flame consists of a burning coal dust wave that follows the shock. The distance between the shock and ignition point is determined by the induction length of carbon char, which is similar to 170 cm and similar to 15 cm for the 47% and 1% cases, respectively. The burning of coal particles is predominantly from heterogeneous reactions with carbon char, and volatilized methane combustion is a secondary effect. Air and particles are mixed by relative velocity between the gas and solid phases. Coal particles burn and produce pressure waves that accelerate the shock from Mach 2.2 to 2.6 for the dilute layer, and from Mach 1.7 to 1.8 in the dense layer. (C) 2014 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
Keywords
Coal; Dust explosion; Numerical simulation; Eulerian-Eulerian approach; Shock-flame complex
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity