Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
3056894
Reference Type
Journal Article
Title
Quantitative Lu-177 SPECT (QSPECT) imaging using a commercially available SPECT/CT system
Author(s)
Beauregard, JM; Hofman, MS; Pereira, JM; Eu, P; Hicks, RJ
Year
2011
Is Peer Reviewed?
Yes
Journal
Cancer Imaging
ISSN:
1470-7330
Volume
11
Issue
1
Page Numbers
56-66
PMID
21684829
DOI
10.1102/1470-7330.2011.0012
Web of Science Id
WOS:000295330800002
Abstract
Purpose: The combination of single photon emission computed tomography (SPECT) and computer tomography (CT) that incorporates iterative reconstruction algorithms with attenuation and scatter correction should facilitate accurate non-invasive quantitative imaging. Quantitative SPECT (QSPECT) may improve diagnostic ability and could be useful for many applications including dosimetry assessment. Using Lu-177, we developed a QSPECT method using a commercially available SPECT/CT system. Methods: Serial SPECT of Lu-177 sources (89-12,400 MBq) were acquired with multiple contiguous energy windows along with a co-registered CT, and were reconstructed using an iterative algorithm with attenuation and scatter correction. Camera sensitivity (based on reconstructed SPECT count rate) and dead-time (based on wide-energy spectrum count rate) were resolved by non-linear curve fit. Utilizing these parameters, a SPECT dataset can be converted to a QSPECT dataset allowing quantitation in Becquerels per cubic centimetre or standardized uptake value (SUV). Validation QSPECT/CT studies were performed on a Lu-177 cylindrical phantom (7 studies) and on 5 patients (6 studies) who were administered a therapeutic dose of [Lu-177]octreotate. Results: The QSPECT sensitivity was 1.08 x 10(-5) +/- 0.02 x 10(-5) s(-1) Bq(-1). The paralyzing dead-time constant was 0.78 +/- 0.03 mu s. The measured total activity with QSPECT deviated from the calibrated activity by 5.6 +/- 1.9% and 2.6 +/- 1.8%, respectively, in phantom and patients. Dead-time count loss up to 11.7% was observed in patient studies. Conclusion: QSPECT has high accuracy both in our phantom model and in clinical practice following [Lu-177]octreotate therapy. This has the potential to yield more accurate dosimetry estimates than planar imaging and facilitate therapeutic response assessment. Validating this method with other radionuclides could open the way for many other research and clinical applications.
Keywords
Quantitation; SPECT/CT; dead-time; dosimetry; lutetium-177
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity