Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
3226110
Reference Type
Journal Article
Title
Pressurized liquid extraction and low-pressure solvent extraction of carotenoids from pressed palm fiber: Experimental and economical evaluation
Author(s)
Cardenas-Toro, FP; Alcazar-Alay, SC; Coutinho, JP; Godoy, HT; Forster-Carneiro, T; Meireles, MAA
Year
2015
Is Peer Reviewed?
Yes
Journal
Food and bioproducts processing
ISSN:
0960-3085
EISSN:
1744-3571
Volume
94
Page Numbers
90-100
DOI
10.1016/j.fbp.2015.01.006
Web of Science Id
WOS:000354140500010
Abstract
In this work, a comparison of Soxhlet extraction (LPSE-SOX),,percolation (LPSE-PE) and pressurized liquid extraction (PLE) for the recovery of carotenoid-rich extracts from pressed palm fiber (PPF) was carried out in terms of yield, carotenoid profile and economic viability to evaluate the methods' industrial applicability. An optimization study was performed for each extraction technique with ethanol at a solvent/feed ratio of 20. The independent variables were temperature (35-55 degrees C), pressure (0.1-8 MPa) and flow rate (1.6, 2.4 g/min). The results showed that the global extraction yield obtained using LPSE-SOX (96 +/- 4 mg extract/g PPF d.b.) after 6 h was higher than that obtained using LPSE-PE (74 +/- 5 mg extract/g PPF d.b., 35 degrees C, 2.4 g/min) or PLE (44 +/- 3 mg extract/g PPF d.b., 55 degrees C, 4 MPa, 2.4 g/min) after dynamic extraction time of 17 min under optimized conditions. On the other hand, the carotenoid yield obtained using PLE (305 +/- 118 mu g alpha-carotene/g extract and 713 +/- 46 mu g beta-carotene/g extract) was higher than the obtained by LPSE-SOX (142 +/- 13 1 mu g alpha-carotene/g extract and 317 +/- 46 mu g beta-carotene/g extract). PLE technique showed the highest selectivity for carotenoids than LPSE techniques. The lowest cost of manufacturing (COM) were obtained for LPSE-PE and PLE with values of US$13.4 and US$29.2/kg extract for a 0.5 m(3) vessel capacity (C) 2015 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
Keywords
Carotenoids; Cost of manufacturing; Soxhlet extraction; Pressed palm fiber; Pressurized liquid extraction; Percolation
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity