Health & Environmental Research Online (HERO)


Print Feedback Export to File
3410991 
Journal Article 
Determination of chemical oxygen demand in fresh waters using flow injection with on-line UV-photocatalytic oxidation and spectrophotometric detection 
Dan, DZ; Sandford, RC; Worsfold, PJ 
2005 
1 
Analyst
ISSN: 0003-2654
EISSN: 1364-5528 
130 
2 
227-232 
English 
15665978 
WOS:000226485900017 
A flow injection manifold incorporating UV-photocatalytic oxidation for the determination of chemical oxygen demand (COD) in freshwater is reported. The method utilises the UV-photocatalytic oxidation of organic compounds instead of conventional heating (used in the standard method), with acidified potassium permanganate as the oxidant. Sodium oxalate, d-glucose and potassium hydrogen phthalate were used as COD standards. A 100 microL sample solution was injected into a 0.3 mol L(-1) H2SO4 carrier stream containing 0.1 mol L(-1) (NH4)2SO4, merged with a permanganate solution (8 x 10(-4) mol L(-1)) and passed through a 250 cm FEP (fluoroethylene polymer) photo-reaction coil wound around a 15 W UV lamp. The sample throughput was 30 h(-1), with an LOD (blank plus 3sigma) of 0.5 mg COD L(-1) and a linear range of 0.5-50 mg COD L(-1) (D-glucose, r2 = 0.9966). The method had good precision with relative standard deviations of 2.7% at 5 mg COD L(-1) and 1.2% at 20 mg COD L(-1) (n = 12) for glucose. Results for a COD certified reference material (QC Demand Quality Control Standard) were in good agreement with the certified COD value. Recovery from Tamar River water samples for all three COD standards was 83.0-111.0% and the COD values determined were in good agreement with those of a permanganate index reference method. 
Organic Chemicals; S88TT14065; Index Medicus; Spectrum Analysis -- methods; Ultraviolet Rays; Oxidation-Reduction; Flow Injection Analysis -- methods; Water Pollution, Chemical; Environmental Monitoring -- methods; Environmental Monitoring -- instrumentation; Fresh Water