Health & Environmental Research Online (HERO)


Print Feedback Export to File
3438240 
Journal Article 
Effects of TiN nanoparticles on the microstructure and properties of W-30Cu composites prepared via electroless plating and powder metallurgy 
Huang, LiMei; Luo, LaiMa; Zhao, MeiL; Luo, GNan; Zhu, XY; Cheng, JiGui; Zan, X; Wu, YuC 
2015 
1 
Materials & Design
ISSN: 0264-1275
EISSN: 1873-4197 
81 
39-43 
WOS:000355378300005 
W-30Cu/(0, 0.25, 0.5, 1, and 2) wt.% TiN composites were prepared via electroless plating with simplified pretreatment and powder metallurgy. The phase and morphology of W-Cu/TiN composite powders and sintered W-Cu/TiN samples were characterized via X-ray diffraction and field emission scanning electron microscopy. Transmission electron microscopy was performed to characterize the microstructure of the sintered W-Cu/TiN samples. The relative density, hardness, electrical conductivity, and compressive strength of the sintered samples were examined. Results showed that W-30Cu composite powders with a uniform structure can be obtained usingWpowder pretreated with nitric acid, ammonium fluoride, and hydrofluoric acid followed by electroless Cu plating. The addition of TiN nanoparticles significantly affected the microstructure and properties of the W-30Cu composites. A good combination of the compressive strength and hardness of the W-30Cu composite material can be obtained by incorporating the TiN additive at 0.25 wt.%. However, the relative density and electrical conductivity slightly decreased. (C) 2015 Elsevier Ltd. All rights reserved. 
Electroless plating; Powder metallurgy; TiN nanoparticles; W-Cu/TiN composites; Performance