Health & Environmental Research Online (HERO)


Print Feedback Export to File
3477153 
Journal Article 
Effects of pH value, chloride and sulfate concentrations on galvanic corrosion between lead and copper in drinking water 
Ng, DQ; Lin, YiPin 
2016 
Yes 
Environmental Chemistry
ISSN: 1448-2517
EISSN: 1449-8979 
13 
4 
602-610 
WOS:000379973200004 
This study investigates the effects of pH value, chloride and sulfate concentrations on galvanic corrosion between lead and copper in drinking water. We hypothesised that galvanic corrosion would occur immediately when a lead-copper couple is first formed and that the release of lead would be suppressed by the subsequent formation of lead corrosion products. Therefore, unlike previous long-term studies using harvested lead pipes, batch experiments employing high-purity lead and copper (99.9 %) wires under stagnant and completely mixed conditions were conducted for a 7-day period to test our hypotheses. It was found that enhanced lead release was indeed observed after the lead-copper couple was formed and the lead profiles after 48 h were strongly influenced by lead corrosion products formed in the system. Under stagnant conditions, reducing pH and increasing either chloride or sulfate concentrations promoted lead release, leading to the formation of lead corrosion products such as cerussite and hydrocerussite as experiments proceeded. The effect of chloride concentration on total lead concentration measured in the aqueous phase was similar to that of sulfate at the same molar concentration, showing that the chloride-to-sulfate mass ratio may not provide a good indication for total lead concentration in water. This study provides essential information on fundamental mechanisms and processes involved in galvanic corrosion in drinking water and may be used to explain related phenomena observed in real drinking-water distribution systems. 
chloride-to-sulfate mass ratio; CSMR