US EPA

3531131 

Journal Article 

Asbestos exposure from gaskets during disassembly of a medium duty diesel engine 

Liukonen, LR; Weir, FW 

2005 

1 

Regulatory Toxicology and Pharmacology
ISSN: 0273-2300
EISSN: 1096-0295 

41 

2 

113-121 

English 

15698534 

10.1016/j.yrtph.2004.10.003 

WOS:000227004700003 

Diesel engines have historically used asbestos-containing gaskets leading to concerns of fiber release and mechanic exposure. Other published studies regarding asbestos fiber release during gasket removal have reported on short-duration events; were conducted under simulated work conditions; or had other limitations. There are no comprehensive studies relating to diesel engine gaskets under conditions similar to those reported herein, evaluating asbestos fiber release from gaskets during all facets of a complete disassembly and cleaning of a medium duty diesel engine in a busy repair and service shop by a journeyman mechanic. Asbestos content of all gaskets was identified; all disassembly tasks were described and timed; and personal and area air monitoring was conducted for each task. Twenty seven of thirty three gaskets contained chrysotile asbestos in concentrations that ranged from 5 to 70%. All but one air monitoring sample reported results below the limit of reliable detection even though plumes of visible dust were evident during various removal, cleaning, and buffing procedures. The detection limit for airborne asbestos fibers in this investigation was influenced by the presence of other shop dust in the air. Our investigation demonstrates that using shop-standard procedures in an established repair facility, a journeyman mechanic has very little potential for exposure to airborne asbestos fibers during disassembly of an engine, approximately 10% or less than that currently considered to be acceptable by OSHA. 

Asbestos, Serpentine; Index Medicus; Occupational Exposure -- analysis; Air Pollution, Indoor -- analysis; Asbestos, Serpentine -- analysis; Automobiles