Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
3580439
Reference Type
Journal Article
Title
Phosphate chemical binder as an anti-hydration additive for Al2O3-MgO refractory castables
Author(s)
Souza, TM; Luz, AP; Santos, T, Jr; Gimenes, DC; Miglioli, MM; Correa, AM; Pandolfelli, VC
Year
2014
Is Peer Reviewed?
1
Journal
Ceramics International
ISSN:
0272-8842
EISSN:
1873-3956
Volume
40
Issue
1
Page Numbers
1503-1512
DOI
10.1016/j.ceramint.2013.07.035
Web of Science Id
WOS:000330820600028
Abstract
Even though many investigations have focused On describing the kinetics of both MgO hydration and Mg(OH)(2) decomposition, few studies have addressed the understanding of the mechanisms to control or to modify the reaction of magnesia with water. Silica is the most applied anti-hydration additive in MgO-containing castables. The use of silico-phosphates (SiO2 rich and presenting higher reactivity and solubility) seems to be a promising alternative to induce a faster generation of magnesium silicate hydrated gels on the MgO grain surface, inhibiting brucite formation. In the present work, the performance of a commercial phosphate chemical binder (combined or not with silica fume) in Al2O3-MgO refractory castables and MgO aqueous suspensions was evaluated. Thermodynamic simulations, thermogravimetric measurements, X-ray diffraction, splitting tensile and hot elastic modulus tests were carried out to understand the additive performance and the characterization of the castables properties. According to the simulated Pourbaix diagrams, two different gels [Mg3Si2O5(OH)(4) or Mg3Si4O10(OH)(2)] can be formed in the structure of the samples (depending on the Mg:Si molar ratio), halting the MgO hydration. Due to the high amount of MgO (6 wt%) contained in the designed Al2O3 MgO castables, the chrysotile-like phase [Mg3Si2O5(OH)(4)] should be the main compound formed during the refractories' processing. Moreover, the blend of silica fume and the phosphate-based additive consisted of the most effective route to stop the Mg(OH)(2) formation so that castables with high flowability, mechanical strength levels and elastic modulus values can be prepared. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
Keywords
Mg(OH)(2); Phosphate; Castable; Hydration
Tags
OPPT REs
•
OPPT_Asbestos, Part I: Chrysotile_C. Engineering
Total – title/abstract screening
Off topic
•
OPPT_Asbestos, Part I: Chrysotile_D. Exposure
Total – title/abstract screening
Off topic
•
OPPT_Asbestos, Part I: Chrysotile_E. Fate
Total – title/abstract screening
Off topic
•
OPPT_Asbestos, Part I: Chrysotile_Supplemental Search
LitSearch: Sept 2020 (Undated)
Science Direct
WoS
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity