Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
4274289
Reference Type
Journal Article
Title
Hexamethyldisiloxane thin films as sensitive coating for quartz crystal microbalance based volatile organic compounds sensors
Author(s)
Boutamine, M; Bellel, A; Sahli, S; Segui, Y; Raynaud, P
Year
2014
Is Peer Reviewed?
1
Journal
Thin Solid Films
ISSN:
0040-6090
EISSN:
1879-2731
Volume
552
Page Numbers
196-203
DOI
10.1016/j.tsf.2013.12.016
Web of Science Id
WOS:000329987300032
Abstract
Hexamethyldisiloxane (HMDSO) thin films coated quartz crystal microbalance (QCM) electrodes have been characterized for the detection of volatile organic compounds (VOCs). The sensitive coatings were plasma polymerized in pure vapor of HMDSO and HMDSO/O-2 mixture. The sensor sensitivity was evaluated by monitoring the frequency shift (Delta f) of the coated QCM electrode exposed to different concentrations of VOC vapors, such as ethanol, methanol, benzene and chloroform. The isotherm response characteristics showed good reproducibility and reversibility. For all types of analyte,Delta f were found to be linearly correlated with the concentration of VOC vapor. It was shown that it is possible to tune the chemical affinity of the sensor by changing the oxygen ratio in the deposition gas mixture. Contact angle measurements (CA), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to study surface wettability, chemical composition and surface morphology of the coated QCM electrodes. ATR-FTIR analysis showed the presence of methyl groups around 840 cm(-1) due to Si-(CH3)(3) rocking vibration making the elaborated sensor surface hydrophobic. When the coating is performed in HMDSO/O2 mixture, AFM and SEM images showed an increase in the effective specific surface area of the sensor due to the increase in surface roughness. Surface morphology combined with chemical composition significantly affects the sensitivity of the QCM-based sensor. (C) 2013 Elsevier B.V. All rights reserved.
Keywords
Plasma polymerization; Hexamethyldisiloxane; Quartz crystal microbalance; Sensor; Volatile organic compounds
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity