Health & Environmental Research Online (HERO)


Print Feedback Export to File
4706288 
Journal Article 
Carbon-fiber-reinforced acrylonitrile-styrene-acrylate composites: Mechanical and rheological properties and electrical resistivity 
Song, J; Liu, X; Zhang, Y; Huang, B; Yang, W 
2016 
Yes 
Journal of Applied Polymer Science
ISSN: 0021-8995
EISSN: 1097-4628 
John Wiley and Sons Inc. 
133 
13 
English 
The aim of this study was to improve the mechanical properties of an acrylonitrile-styrene-acrylate copolymer (ASA) with the help of carbon fibers (CFs). Additionally, the effects of the CFs on the morphology, rheological properties, dynamical mechanical properties, electrical resistivity, and heat resistance of the ASA composites were studied with scanning electron microscopy, rotational rheometry, and dynamic thermomechanical analysis (DMA). The mechanical properties of the ASA composites were enhanced largely by the CFs. The maximum tensile strength of the ASA/CF composites reached 107.2 MPa. The flexural strength and flexural modulus also reached 162.7 MPa and 12.4 GPa, respectively. These findings were better than those of neat ASA; this was attributed to the excellent interfacial adhesion between the CFs and ASA resin. Rheological experiments proved that the viscosity and storage modulus (G') values of the ASA/CF composites did not increase until the CF content reached 20%. The DMA outcomes confirmed that the glass-transition temperature of the ASA composites was elevated from 120.6 to 125 degrees C. Importantly, the G' values of the composites with 20 and 30% CFs showed a large increase during heating. In addition, the ASA/CF composites exhibited excellent conductivity and heat resistance. (C) 2015 Wiley Periodicals, Inc. 
carbon fibers; mechanical properties; morphology; rheology