Health & Environmental Research Online (HERO)


Print Feedback Export to File
475194 
Journal Article 
Drying of salt-contaminated masonry: MRI laboratory monitoring 
Goncalves, TD; Pel, L; Rodrigues, JD 
2007 
Yes 
Environmental Geology
ISSN: 0943-0105
EISSN: 1432-0495 
52 
2 
249-258 
English 
Drying of masonry specimens was monitored by means of a two-dimensional (2D) magnetic resonance imaging (MRI) technique. The external surfaces stayed wet for longer if NaCl was present instead of pure water only. This corroborates many practical observations that salts aggravate dampness in masonry. A slower evaporation process and not hygroscopicity was the cause. That suggests that salt-induced dampness may, in general, arise simply from changes in the drying process of masonry materials. That also implies that the height and depth at which crystallization occurs in walls may depend on the relative equilibrium humidity (RHeq) and other properties of salts that influence drying of porous materials. Evaporation rates of free surfaces of pure water and saturated NaCl solution were measured by a gravimetric technique. The results indicate that slow drying of salt-contaminated materials is not due only to the lower RHeq of salt solutions. The effective surface of evaporation is likely to be reduced perhaps due to blocking of pores by salt crystals. Final salt-distribution maps of the specimens show that: (a) salts may affect the inner materials of the masonry, even in evaporation-induced processes that lead crystallization to occur predominantly on the external surface; (b) distinct internal distribution patterns occur if masonry composition varies. 
magnetic resonance imaging; drying; porous materials; salt decay; ancient masonry; hygroscopic behavior; samples