Health & Environmental Research Online (HERO)


Print Feedback Export to File
5092768 
Journal Article 
Cross-flow membrane microfiltration of a bacteriol fermentation broth 
Nagata, N; Herouvis, KJ; Dziewulski, DM; Belfort, G 
1989 
Yes 
Biotechnology and Bioengineering
ISSN: 0006-3592
EISSN: 1097-0290 
34 
4 
447-466 
English 
18588126 
Although cross-flow membrane filtration is a very attractive option for harvesting cells and recovering enzymes from cell homogenates, the process is not without its problems. Foremost of these is the deposit of dissolved and suspended solutes onto the membrane surface during operation. The formation of these dense and sometimes compressive sublayers (often called cakes) offers additional resistance to axial and permeate flows and often affects the retention characteristics of the process. In view of the complex nature of the sublayer formation process and its sensitivity to cross-flow velocity, this investigation was undertaken to determine the main factors responsible for the decline in performance during the harvesting of B. polymyxa broth by membrane microfiltration. System parameters varied include axial flow rate, concentration of cells, proteins and other components in the feed, membrane materials (ceramic, polypropylene, and stainless steel), and cleaning methods. To help explain the observed results, a new mass transport model-the solids flux model-based on the assumptions that back migration of particles from the sublayer or membrane surface is negligible and that particles that reach the solid-solution interface attach (stick) completely, is tested. Using a variety of diagnostic methods, magnesium ammonium phosphate precipitate is formed during steam sterilization of the medium and is implicated as the major foulant in this study.