Health & Environmental Research Online (HERO)


Print Feedback Export to File
4706938 
Journal Article 
Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binder 
Dubois, E; Mehta, Y; Nolan, A 
2014 
Yes 
Construction and Building Materials
ISSN: 0950-0618
EISSN: 1879-0526 
65 
184-190 
WOS:000338810900021 
Nationwide traffic loads are increasing, pushing conventional asphalt to its limit. Polymer modification of asphalt, which can improve both low and high temperature performance, is already available, however, in many cases traditional Superpave testing is not sensitive enough to quantify the impact of modification, dimensioning its use. elastic recovery and forced ductility, Superpave performance grade plus tests, are sensitive to polymer modification but are time intensive and costly. These obstacles have lead the New jersey Department of Transportation to require styrene-butadiene or styrene-butadiene-styrene to be incorporated in all modified binder to ensure performance, causing supply shortages and rising cost in the state.



A relatively new test developed by the Federal Highway Administration, Multiple Stress Creep Compliance (MSCR) offers a simpler procedure using the Dynamic Shear Rheometer (DSR), thus it does not require the expense of purchasing additional testing equipment. The objective of this study is to correlate MSCR test results to performance. Flow time testing was selected as the measure of performance for its high strain and destructive nature.



After evaluating ten binders the results indicate flow time results improve as J(nr) the non-recoverable creep compliance decreases. J(nr) is determined by dividing the non-recoverable (or permanent) shear strain by the applied shear stress. All samples recording a J(nr) bellow 0.5 kPa(-1) performed well, while performance generally suffered as J(nr), increased from there. The J(nr), parameter is recommended to be used as a standard measure of performance for polymer modified binders with a 0.5 kPa(-1) or below criteria. (C) 2014 Elsevier Ltd. All rights reserved. 
Polymer modified binders; Multiple Stress Creep and Recovery (MSCR)