Health & Environmental Research Online (HERO)


Print Feedback Export to File
5929976 
Journal Article 
Removal of the residual xanthate from flotation plant tailings using bentonite modified by magnetic nano-particles 
Amrollahi, A; Massinaei, M; Moghaddam, AZ 
2019 
1 
Minerals Engineering
ISSN: 0892-6875 
134 
142-155 
WOS:000462107200014 
The residual organic reagents (including xanthates) in the flotation tailings can cause environmental issues during their disposal, besides their deleterious influence on the flotation performance during recycling. In this study, the adsorption characteristics of bentonite modified with copper and manganese ferrite nanoparticles (Be-CuFe2O4, Be-MnFe2O4) for xanthate removal from the synthetic and real solutions was studied. The characterization studies by XRF, XRD, BET, SEM, EDX, VSM and FTIR techniques confirmed the formation of magnetic nanoparticles. The adsorption capacity of Be-CuFe2O4 was found to be higher than Be-MnF( 2)O(4)( )and at optimum conditions (adsorbent dosage: 4 mg/mL; xanthate concentration: 1000 mg/L; pH = 9.2; time = 40 min) more than 94% of the residual xanthate was removed by this adsorbent. The kinetic studies showed that rate of xanthate adsorption on both adsorbents followed the pseudo-second order model. The intraparticle diffusion was not the only rate-limiting step of the adsorption process. The equilibrium isotherms were best fitted to the Langmuir model. This suggests monolayer adsorption of xanthate on homogenous sites of the adsorbents. The thermodynamic studies revealed that the adsorption process was spontaneous, endothermic and entropy-driven. The synthesized adsorbents were capable of completely removing xanthate from the actual samples taken from the tailings of a copper flotation plant (Qaleh-Zari, Iran). 
Xanthate; Adsorption; Bentonite; Nanoparticles