Health & Environmental Research Online (HERO)


Print Feedback Export to File
6059643 
Journal Article 
The selection of pretreatment options for anaerobic digestion (AD): A case study in olive oil waste production 
Ruggeri, B; Battista, F; Bernardi, M; Fino, D; Mancini, G 
2015 
Yes 
Chemical Engineering Journal
ISSN: 1385-8947 
259 
630-639 
WOS:000343952400065 
The aim of this work was to examine the effects of several pretreatment processes on anaerobic digestion (AD) by scoring the Biochemical Methane Potential (BMP) and the Energy Sustainability Index (ESI) of each process while taking into account the direct (heat and electricity) and indirect energy costs necessary to produce the chemicals that were used. The ESI is a measure of the ratio between the energy produced as methane during fermentation testing and that spent on pretreatment. The candidate procedures were applied to the main by-products of olive oil production: olive mill wastewaters (OMWW) and olive pomace (OP). Owing to their high organic concentration (COD>250g/L), high electrical conductivity, high concentration of polyphenols (0.5–5g/L) and low pH (4–6), the biodegradation of these waste products is a difficult process with a high environmental impact. As OP and OMWW are composed of complex chemical substances such as cellulose and lignin, these products are hardly degraded pretreatment before AD becomes necessary. Based on BMP and ESI values, the most effective pretreatment was found to be the addition of CaCO3, which resulted in a biogas production of 21.6NL/L and an ESI=14 (i.e., the energy obtained in the form of methane is 14 times that of the energy spent). 
Energy Sustainability Index; Pretreatment selection; Anaerobic digestion; Olive pomace; Olive mill wastewaters