Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
6080827
Reference Type
Journal Article
Title
Numerical and experimental study of flame propagation and quenching of lean premixed turbulent low swirl flames at different Reynolds numbers
Author(s)
Carlsson, H; Nordstrom, E; Bohlin, A; Wu, Y; Zhou, Bo; Li, Z; Alden, M; Bengtsson, P; Bai, X
Year
2015
Is Peer Reviewed?
Yes
Journal
Combustion and Flame
ISSN:
0010-2180
Volume
162
Issue
6
Page Numbers
2582-2591
DOI
10.1016/j.combustflame.2015.03.007
Web of Science Id
WOS:000360592600024
URL
http://www.sciencedirect.com/science/article/pii/S0010218015000826
Exit
Abstract
This paper presents a joint experimental and large eddy simulation (LES) study of lean premixed low swirl stabilized methane/air flames at different Reynolds numbers (Re∼20,000–100,000). The aims are to investigate the sensitivity of the structures and dynamics of low swirl flames to the inflow boundary conditions and to evaluate the capability of an LES flamelet model in predicting the stabilization and local extinction of the flames. Chemiluminescence measurements are carried out for Re=20,000–50,000 and further detailed oxygen concentration and temperature fields are measured using rotational coherent anti-Stokes Raman spectroscopy (RCARS) for Re=20,000 and 30,000 along the centerline of the burner and at various radial positions at different heights above the burner. The data are used first for validation of the combustion LES model employed in the numerical simulations, and then the RCARS and LES results are used to delineate the effect of ambient air entrainment on the flame structure at various burner exit velocities. A three-scalar flamelet model based on a level-set G-equation shows excellent predictions of the lift-off positions and the structures of the flames, including quenching at the trailing edge of the flame. The results show that the flame lift-off height varies only slightly when the burner exit velocity is increased, which is consistent with a shear-layer flame stabilization mechanism reported previously. The volume of the flame decreases substantially with increasing burner exit velocity at relatively low Reynolds numbers, as a result of flame quenching at the trailing edge of the flame caused by entrainment of the ambient air into the fuel/air stream and the flame itself. At high Reynolds numbers the flame structures become fairly self-similar with the flame volume nearly independent of the Reynolds number.
Keywords
Model validation; Large eddy simulation; Rotational coherent anti-Stokes Raman spectroscopy; Thermometry; Low swirl flame sensitivity
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity