Health & Environmental Research Online (HERO)


Print Feedback Export to File
6660393 
Journal Article 
Molecular weight distribution of polystyrene produced in a starved feed reactor 
Cao, GP; Zhu, ZN; Le, HH; Zhang, MH; , 
1999 
Yes 
Chinese Journal of Chemical Engineering
ISSN: 1004-9541 
SPRINGER VERLAG 
BERLIN 
205-213 
WOS:000082736000003 
A starved feed reactor (SFR) is a semi-batch polymerization reactor where initiator and monomer are fed slowly into a fixed amount of solvent. The polymerization is carried out isothermally at elevated temperatures. The added initiator decomposes instantaneously and the added monomer polymerizes immediately. The molecular weight (MW) and molecular weight distribution (MWD) of the product polymer can be effectively controlled by the feed ratio of monomer to initiator. This paper presents a study on the MWD of styrene polymerization in a SFR. The MWD model parameters are regressed with experimental data. Although the solids fraction in the SFR is high (higher than 50%), viscosity is not too high and the "gel effect" is weak due to the low molecular weight of the products. It is found that the termination rate constant is a power function of molecular weight, radicals terminate via 100% combination, the thermal initiation can be neglected even at high reaction temperature studied. And calculated results indicate that in the SFR, the validity of the long chain assumption becomes doubted. It appears that other alterative assumption should be found for an improved model.