Health & Environmental Research Online (HERO)


Print Feedback Export to File
7038059 
Journal Article 
The Effect of Membrane Material and Surface Pore Size on the Fouling Properties of Submerged Membranes 
Jeon, S; Rajabzadeh, S; Okamura, Ryo; Ishigami, T; Hasegawa, S; Kato, N; Matsuyama, H; , 
2016 
1 
Water
ISSN: 2073-4441 
MDPI AG 
BASEL 
WOS:000392480200055 
We aimed to investigate the relationship between membrane material and the development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and hydrophilicities. Batch filtration tests were performed using submerged single hollow fiber membrane ultrafiltration (UF) modules with different polymeric membrane materials including cellulose acetate (CA), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) with activated sludge taken from a municipal wastewater treatment plant. The three UF hollow fiber membranes were prepared by a non-solvent-induced phase separation method and had similar water permeabilities and pore sizes. The results revealed that transmembrane pressure (TMP) increased more sharply for the hydrophobic PVDF membrane than for the hydrophilic CA membrane in batch filtration tests, even when membranes with similar permeabilities and pore sizes were used. PVDF hollow fiber membranes with smaller pores had greater fouling propensity than those with larger pores. In contrast, CA hollow fiber membranes showed good mitigation of membrane fouling regardless of pore size. The results obtained in this study suggest that the surface hydrophilicity and pore size of UF membranes clearly affect the fouling properties in MBR operation when using activated sludge.