Health & Environmental Research Online (HERO)


Print Feedback Export to File
7292773 
Journal Article 
Carbothermal reduction of copper smelter slag for recycling into pig iron and glass 
Sarfo, P; Wyss, G; Ma, G; Das, A; Young, C 
2017 
1 
Minerals Engineering
ISSN: 0892-6875 
107 
8-19 
WOS:000399519000003 
Slags produced from copper smelting are siliceous and often contain valuable metals such as copper and iron as well as deleterious elements such as arsenic and lead. A copper slag was obtained from the former Anaconda smelter site, USA and characterized by SEM-EDS, XRD, TG-DTA and ICP-OES. A recovery process was developed to separate the valuables from the silicates thereby producing value-added products and simultaneously reducing environmental concerns. Results show that the major phase was an amorphous iron-calcium-aluminosilicate of variable composition with copper sulfide prills. Thermodynamic calculations and carbothermal reduction experiments indicate that most of the copper and iron can be recovered as pig iron from the initial slag using minor amounts of lime and alumina and treating at 1350 degrees C/1623 K or higher for 30-90 min. The resulting secondary slag can also be recycled as a glass to the glass and ceramic industry. Statistically designed experiments were conducted on the slag to identify the most favored regime to optimize the recovery of pig iron as well as the hardness and density of the secondary slag. (C) 2017 Elsevier Ltd. All rights reserved. 
Copper slag; Recycling; Carbothermal reduction; Pig iron; Glass; Optimization