Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
7743742
Reference Type
Journal Article
Title
Biodiesel production from jatropha seeds: Solvent extraction and in situ transesterification in a single step
Author(s)
Kartika, IA; Yani, M; Ariono, D; Evon, Ph; Rigal, L
Year
2013
Is Peer Reviewed?
1
Journal
Fuel
ISSN:
0016-2361
EISSN:
1873-7153
Publisher
Elsevier Ltd
Volume
106
Page Numbers
111-117
Language
English
DOI
10.1016/j.fuel.2013.01.021
Web of Science Id
WOS:000316190200013
Abstract
The objective of this study was to investigate solvent extraction and in situ transesterification in a single step to allow direct production of biodiesel from jatropha seeds. Experiments were conducted using milled jatropha seeds, and n-hexane as extracting solvent. The influence of methanol to seed ratio (2:1-6:1), amount of alkali (KOH) catalyst (0.05-0.1 mol/L in methanol), stirring speed (700-900 rpm), temperature (40-60 °C) and reaction time (3-5 h) was examined to define optimum biodiesel yield and biodiesel quality after water washing and drying. When stirring speed, temperature and reaction time were fixed at 700 rpm, 60 °C and 4 h respectively, highest biodiesel yield (80% with a fatty acid methyl ester purity of 99.9%) and optimum biodiesel quality were obtained with a methanol to seed ratio of 6:1 and 0.075 mol/L KOH in methanol. Subsequently, the influence of stirring speed, temperature and reaction time on biodiesel yield and biodiesel quality was studied, by applying the randomized factorial experimental design with ANOVA (F-test at p = 0.05), and using the optimum values previously found for methanol to seed ratio and KOH catalyst level. Most experimental runs conducted at 50 °C resulted to high biodiesel yields, while stirring speed and reaction time did not give significantly effect. The highest biodiesel yield (87% with a fatty acid methyl ester purity of 99.7%) was obtained with a methanol to seed ratio of 6:1, KOH catalyst of 0.075 mol/L in methanol, a stirring speed of 800 rpm, a temperature of 50 °C, and a reaction time of 5 h. The effects of stirring speed, temperature and reaction time on biodiesel quality were not significant. Most of the biodiesel quality obtained in this study conformed to the Indonesian Biodiesel Standard. © 2013 Elsevier Ltd. All rights reserved.
Keywords
Biodiesel; Jatropha seed; In situ transesterification; Solvent extraction
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity