Health & Environmental Research Online (HERO)


Print Feedback Export to File
8152843 
Book/Book Chapter 
An overview of combustion mechanisms and flame structures for advanced solid propellants 
Beckstead, MW 
2000 
American Institute of Aeronautics and Astronautics 
Reston, VA 
English 
Ammonium perchlorate (AP) and cyclotretramethylenetetranitramine (HMX) are two solid ingredients often used in modern solid propellants. Although these two ingredients have very similar burning rates as monopropellants, they lead to significantly different characteristics when combined with binders to form propellants. Part of the purpose of this paper is to relate the observed combustion characteristics to the postulated flame structures and mechanisms for AP and HMX propellants that apparently lead to these similarities and differences. For AP composite propellants, the primary diffusion flame is more energetic than the monopropellant flame, leading to an increase in burning rate over the monopropellant rate. In contrast the HMX primary diffusion flame is less energetic than the HMX monopropellant flame and ultimately leads to a propellant rate significantly less than the monopropellant rate in composite propellants. During the past decade the search for more energetic propellants and more environmentally acceptable propellants is leading to the development of propellants based on ingredients other than AP and HMX. The objective of this paper is to utilize the more familiar combustion characteristics of AP and HMX containing propellants to project the combustion characteristics of propellants made up of more advanced ingredients. The principal conclusion reached is, that most advanced ingredients appear to burn by combustion mechanisms similar to HMX containing propellants rather than AP propellants. 
36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 
Huntsville, AL 
July 16-19, 2000