Health & Environmental Research Online (HERO)


Print Feedback Export to File
9493544 
Book/Book Chapter 
Acrylonitrile–butadiene–styrene polymers 
Kulich, DM; Gaggar, SK; Lowry, V; Stepien, R 
2001 
Wiley 
Hoboken, NJ 
Encyclopedia of polymer science and technology: Volume 1 
174-203 
English 
Acrylonitrile–butadiene–styrene (ABS) polymers are composed of elastomer dispersed as a grafted particulate phase in a thermoplastic matrix of styrene and acrylonitrile copolymer (SAN). The presence of SAN grafted onto the elastomeric component, usually polybutadiene or a butadiene copolymer, compatabilizes the rubber with the SAN component. Property advantages provided by this graft terpolymer include excellent toughness, good dimensional stability, good processibility, and good chemical resistance. The system is structurally complex. This allows considerable versatility in the tailoring of properties to meet specific product requirements. Numerous grades of ABS are available, including alloys and specialty grades for high heat, flaming-retardant, or static dissipative product requirements. Good chemical resistance combined with the relatively low water absorptivity (<1%) results in high resistance to staining agents. The three commercial processes for manufacturing ABS are emulsion, mass, and mass-suspension. ABS can be processed by compression and injection molding, extrusion, calendering, and blow molding. Post-processing operations include cold forming, painting, and adhesive bonding. As a “bridge” polymer between commodity plastics and higher performance engineering thermoplastics, ABS has become the largest selling engineering thermoplastic. 
Mark, HF 
9781118633892; 9780471440260