Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
1105466
Reference Type
Book/Book Chapter
Title
Fabrication and Properties of Microencapsulated-paraffin/gypsum-matrix Building Materials for Thermal Energy Storage
Author(s)
Su, JF; Wang, SB
Year
2012
Is Peer Reviewed?
Yes
Journal
Energy Conversion and Management
ISSN:
0196-8904
Book Title
Advanced Materials Research
Volume
427
Page Numbers
45-50
DOI
10.1016/j.enconman.2011.10.015
Web of Science Id
WOS:000301217200011
Abstract
Microencapsulated phase change materials (microPCMs) have been widely applied in solid matrix as thermal-storage or temperature-controlling functional composites. The aim of this work was to prepare and investigate the properties of microPCMs/gypsum-matrix building materials for thermal energy storage. MicroPCMs contain paraffin was fabricated by in situ polymerization using methanol-modified melamine-formaldehyde (MMF) as shell material. A series of microPCMs samples were prepared under emulsion stirring rates in range of 1000-3000 r min(-1) with core/shell weight ratios of 3/1, 2/1, 1/1, 1/2 and 1/3, respectively. The shell of microPCMs was smooth and compact with global shape, its thickness was not greatly affected by the core/shell ratio and emulsion stirring rate. DSC tests showed that the shell of microPCMs did not influence the phase change behavior of pure paraffin. It was found from TGA analysis that microPCMs samples containing paraffin lost their weight at the temperature of nearly 250 degrees C, which indicated that the PCM had been protected by shell. More shell material in microPCMs could enhance the thermal stability and provide higher compact condition for core material. After a 100-times thermal cycling treatment, the microPCMs contain paraffin also nearly did not change the phase change behaviors of PCM. With the increasing of weight contents of microPCMs in gypsum board, the thermal conductivity (2) values of composites had decreased. The simulation of temperature tests proved that the microPCMs/gypsum composite could store the time-dependent and intermittent solar energy, which did not necessarily meet the energy needs for space heating at all times. (C) 2011 Elsevier Ltd. All rights reserved.
Keywords
microcapsules; phase change materials; microPCMs; gypsum composites
Tags
IRIS
•
Methanol (Non-Cancer)
Search 2012
WOS
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity