Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
1114386
Reference Type
Journal Article
Title
Aerosol-Assisted CVD of Titanium Dioxide Thin Films from Methanolic Solutions of Titanium Tetraisopropoxide; Substrate and Aerosol-Selective Deposition of Rutile or Anatase
Author(s)
Edusi, C; Hyett, G; Sankar, G; Parkin, IP
Year
2011
Is Peer Reviewed?
Yes
Journal
Chemical Vapor Deposition
ISSN:
0948-1907
Volume
17
Issue
1-3
Page Numbers
30-36
DOI
10.1002/cvde.201006872
Web of Science Id
WOS:000288563500005
Abstract
Titanium dioxide (TiO2) thin films are synthesized using aerosol-assisted (AA) CVD of titanium (IV) isopropoxide (TTIP) in methanol. Deposition is carried out on glass, steel, and titanium substrates at 400-550 degrees C. The films produce morphologies that are radically different to those from typical aerosol-assisted processes, and from the use of TTIP in low or atmospheric pressure (AP) CVD. The films show some substrate-dependent morphology and properties. In particular at 550 degrees C the films on steel show needle-and rod-like particles. X-ray diffraction (XRD) and Raman spectroscopy of the TiO2 films show that on steel or titanium substrates only the rutile form can be obtained, whereas on glass either anatase, anatase/rutile mixtures, or rutile can be obtained, depending on substrate temperature. The TiO2 films formed at 550 degrees C on all substrates are hydrophobic to water droplets, with contact angles in the range 101-110 degrees. These films become hydrophilic on heating to above 100 degrees C in air, or superhydrophillic when irradiated under 254nm radiation generating water-contact angles less than 5 degrees. Surprisingly, use of TTIP under APCVD on steel substrates without an aerosol form exclusively the anatase form of TiO2 at 400-550 degrees C, whereas use of a methanolic aerosol delivery system for the TTIP forms rutile. Hence use of the methanol aerosol has a controlling influence on the deposition chemistry. The TiO2 thin films are shown to be active photocatalysts using a dye-ink test, and are also shown to be able to photo-split water in a sacrificial system to evolve oxygen.
Keywords
AACVD; APCVD; Photocatalyst; Titanium dioxide; Water splitting
Tags
IRIS
•
Methanol (Non-Cancer)
Search 2012
WOS
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity