Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
2379354
Reference Type
Journal Article
Title
Determination of uranium metal concentration in irradiated fuel storage basin sludge using selective dissolution
Author(s)
Delegard, CH; Sinkov, SI; Chenault, JW; Schmidt, AJ; Welsh, TL; Pool, KN
Year
2014
Is Peer Reviewed?
Yes
Journal
Journal of Radioanalytical and Nuclear Chemistry
ISSN:
0236-5731
EISSN:
1588-2780
Volume
299
Issue
3
Page Numbers
1871-1882
DOI
10.1007/s10967-013-2884-1
Web of Science Id
WOS:000332034400091
Abstract
Irradiated uranium metal fuel was stored underwater in the K East and K West storage basins at the US Department of Energy Hanford Site. The uranium metal under damaged cladding reacted with water to generate hydrogen gas, uranium oxides, and spalled uranium metal particles which intermingled with other particulates to form sludge. While the fuel has been removed, uranium metal in the sludge remains hazardous. An expeditious routine method to analyze 0.03 wt% uranium metal in the presence of >30 wt% total uranium was needed to support safe sludge management and processing. A selective dissolution method was designed based on the rapid uranium oxide dissolution but very low uranium metal corrosion rates in hot concentrated phosphoric acid. The uranium metal-bearing heel from the phosphoric acid step then is rinsed before the uranium metal is dissolved in hot concentrated nitric acid for analysis. Technical underpinnings of the selective dissolution method, including the influence of sludge components, were investigated to design the steps and define the reagents, quantities, concentrations, temperatures, and times within the selective dissolution analysis. Tests with simulant sludge proved the technique feasible. Tests with genuine sludge showed a 0.0028 +/- 0.0037 wt% (at one standard deviation) uranium metal analytical background, a 0.011 wt% detection limit, and a 0.030 wt% quantitation limit in settled (wet) sludge. In tests using genuine K Basin sludge spiked with uranium metal at concentrations above the 0.030 wt% +/- 25 % (relative) quantitation limit, uranium metal recoveries averaged 99.5 % with a relative standard deviation of 3.5 %.
Keywords
Uranium metal; Uranium oxides; Nuclear fuel storage basin sludge; Phosphoric acid
Tags
IRIS
•
Uranium
Uranium Literature Search Update 3/2017
WOS
•
Uranium Toxicological Review
Date limited literature search 2011-2021
New to this search
Scopus
WOS
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity