Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
4162879
Reference Type
Journal Article
Title
Electro-Plating and Characterisation of CdTe Thin Films Using CdCl2 as the Cadmium Source
Author(s)
Abdul-Manaf, NorA; Salim, HI; Madugu, ML; Olusola, OI; Dharmadasa, IM
Year
2015
Is Peer Reviewed?
Yes
Journal
Energies
ISSN:
1996-1073
Volume
8
Issue
10
Page Numbers
10883-10903
DOI
10.3390/en81010883
Web of Science Id
WOS:000364230500014
Abstract
Cadmium telluride ( CdTe) thin films have been successfully prepared from an aqueous electrolyte bath containing cadmium chloride ( CdCl2) center dot H2O and tellurium dioxide ( TeO2) using an electrodeposition technique. The structural, electrical, morphological and optical properties of these thin films have been characterised using X-ray diffraction ( XRD), Raman spectroscopy, optical profilometry, DC current- voltage ( I- V) measurements, photoelectrochemical ( PEC) cell measurement, scanning electron microscopy ( SEM), atomic force microscopy ( AFM) and UV- Vis spectrophotometry. It is observed that the best cathodic potential is 698 mV with respect to standard calomel electrode ( SCE) in a three electrode system. Structural analysis using XRD shows polycrystalline crystal structure in the as- deposited CdTe thin films and the peaks intensity increase after CdCl2 treatment. PEC cell measurements show the possibility of growing p-, i- and n- type CdTe layers by varying the growth potential during electrodeposition. The electrical resistivity of the as- deposited layers are in the order of 104 Omega center dot cm. SEM and AFM show that the CdCl2 treated samples are more roughness and have larger grain size when compared to CdTe grown by CdSO4 precursor. Results obtained from the optical absorption reveal that the bandgap of as- deposited CdTe ( 1.48- 1.52) eV reduce to ( 1.45- 1.49) eV after CdCl2 treatment. Full characterisation of this material is providing new information on crucial CdCl2 treatment of CdTe thin films due to its built-in CdCl2 treatment during the material growth. The work is progressing to fabricate solar cells with this material and compare with CdTe thin films grown by conventional sulphate precursors.
Keywords
electroplating; cadmium telluride (CdTe); CdCl2 treatment; material characterisation
Tags
•
Inorganic Mercury Salts (2)
Mercurous Chloride
Litsearch 1999-2018
WOS
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity