Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Main menu
Environmental Topics
Laws & Regulations
About EPA
Health & Environmental Research Online (HERO)
Contact Us
Print
Feedback
Export to File
Search:
This record has one attached file:
Add More Files
Attach File(s):
Display Name for File*:
Save
Citation
Tags
HERO ID
1105787
Reference Type
Journal Article
Title
Oil extracted from spent coffee grounds as a renewable source for fatty acid methyl ester manufacturing
Author(s)
Al-Hamamre, Z; Foerster, S; Hartmann, F; Kroger, M; Kaltschmitt, M
Year
2012
Is Peer Reviewed?
1
Journal
Fuel
ISSN:
0016-2361
EISSN:
1873-7153
Publisher
ELSEVIER SCI LTD
Location
OXFORD
Volume
96
Issue
1
Page Numbers
70-76
Language
English
DOI
10.1016/j.fuel.2012.01.023
Web of Science Id
WOS:000301853900007
Abstract
The effect of different extraction solvents (polar and non-polar) on yield, chemical and physical properties, including free fatty acid content (FFA) or acid value (AV), saponification value (SV), density, viscosity, elemental composition and heating values of oil extracted from spent coffee grounds (SCG) is investigated. The Soxhlet extraction method is utilized for the extraction of oil from spent coffee grounds. Iso-propanol, ethanol, and acetone as polar solvents and toluene, chloroform, hexane and n-pentane as nonpolar solvents are used. For each solvent, the oil yield is recorded for different time spans. The results show that the highest oil yield (15.3%) is achieved using hexane as an extraction solvent after 30 min of extraction time. The AV and SV of the extracted oils vary depending on the extraction solvent. The results indicate that AV of SCG oil extracted with hexane is 3.65% (7.3 mg KOH/g). This value is lower than the values for spent coffee oil extracted with the other solvents (ethanol 3.85%, isopropanol 6.4%, chloroform 4.55%, and toluene 4.15%). Free fatty acids (FFA) of the extracted oil are converted into fatty acid methyl ester (FAME) by base-catalyzed esterification. Effects of temperature, the ratio of FFA to the methanol-KOH solution and the reaction time are investigated. With one step alkali-catalyzed transesterification, oil conversion to methyl ester can be enhanced from approx. 55-85% by increasing the reaction time, the reaction temperature and the MeOH-KOH/FFA ratio. However, a complete oil conversion could only be achieved by utilizing a two-steps transesterification process. © 2012 Elsevier Ltd. All rights reserved.
Keywords
Methyl ester; Coffee oil; Spent coffee grounds; Extraction; Polar-nonpolar solvents
Tags
IRIS
•
Methanol (Non-Cancer)
Search 2012
WOS
Search Jan 30 2013
WOS
Home
Learn about HERO
Using HERO
Search HERO
Projects in HERO
Risk Assessment
Transparency & Integrity