US EPA

1494701 

Journal Article 

Shape selective and hydrogen spillover approach in the design of sulfur-tolerant hydrogenation catalysts 

Yang, H; Chen, H; Chen, J; Omotoso, O; Ring, Z 

2006 

Yes 

Journal of Catalysis
ISSN: 0021-9517
EISSN: 1090-2694 

243 

1 

36-42 

English 

10.1016/j.jcat.2006.06.026 

WOS:000241205200005 

http://://WOS:000241205200005
Exit
 

This paper presents a novel approach to preparing sulfur-tolerant noble metal catalysts and the proof-of-concept experimental results. Our approach combines the concepts of shape selectivity and hydrogen spillover to the design of sulfur-tolerant catalysts. Platinum particles were encapsulated in the NaA-zeolite cages during zeolite synthesis. The pore opening was subsequently reduced by potassium ion exchange and chemical vapor deposition of tetraethyl orthosilicate (TEOS), allowing hydrogen molecules to enter but preventing hydrogen sulfide molecules from contacting the platinum particles. The success of platinum encapsulation in KA-zeolite was confirmed by XRD, H-2 and CO chemisorption, and TOF-SIMS techniques. A sulfur-tolerant catalyst was prepared by mixing TEOS-treated Pt/KA-zeolite with HY zeolite and gamma-alumina, and tested in the hydrogenation of naphthalene. Hydrogen species produced via dissociative adsorption of hydrogen molecules on platinum particles, situated inside KA-zeolite cages, migrated through surface diffusion to HY zeolite and gamma-alumina. Our experimental data demonstrated that the encapsulated platinum particles continuously generated hydrogen surface species that were used to hydrogenate naphthalene adsorbed on HY zeolite and gamma-alumina. These platinum particles showed resistance to sulfur poisoning when pure hydrogen was replaced by 3% H2S in hydrogen in the naphthalene hydrogenation reaction. Crown Copyright (c) 2006 Published by Elsevier Inc. All rights reserved. 

platinum encapsulation; shape selective; hydrogen spillover; naphthalene hydrogenation; zeolite A; chemical vapor deposition