US EPA

2139991 

Book/Book Chapter 

Zero-energy removal of ozone in residences 

Gall, E; Siegel, JA; Corsi, R 

2011 

American Society of Heating, Refrigerating and Air-Conditioning Engineers 

Atlanta, GA 

ASHRAE transactions 2011: Papers presented at the 2011 Winter Conference in Las Vegas, Nevada 

411-418 

English 

WOS:000295933900050 

Ozone is present indoors largely as a result of transport from outdoors. Conventional strategies to remove ozone require energy and thus are not appropriate for zero-energy buildings. We explore the use of passive reactive materials (PRMs), indoor surfaces that remove ozone with no additional energy input and without producing byproducts, to reduce indoor ozone concentrations. This work presents the results of a Monte Carlo simulation to assess the ozone removal effectiveness of active and passive methods of indoor ozone removal. We compare two different PRMs to stand-alone activated carbon filtration and HVAC filtration. Housing stock data for approximately 100 homes in Houston, TX are taken from the literature to calculate energy and material requirements to achieve 50% and 80% indoor ozone removal effectiveness in these homes. Model results indicate that to achieve 50% ozone removal in half of the homes requires approximately 30 kWh and 5 kWh per home each day for stand-alone filtration and HVAC filtration, respectively. To achieve this same level of indoor ozone reduction with PRMs requires 75 m(2) (807 ft(2)) for activated carbon cloth and 200 m(2) (2153 ft(2)) of unpainted gypsum wallboard. These results indicate that PRM use represents a viable option for zero-energy control of indoor ozone. 

Ramanathan, G 

ASHRAE Transactions, vol. 117, pt. 1 

9781223009322 

Winter Conference of the American Society of Heating Refrigerating and Air Conditioning Engineers (ASHRAE) 

Las Vegas, NV 

2011